Filter
Top Products
52 Altitude 300-2™ Getting Started Guide
Reglatory Compliances
Conditions of Use in the European Community
The Altitude 300-2
TM
wireless port Model# 15706 and 15707 for the EU and Rest
of World reglatory domain is intended to operate in all countries of the
European Community. Special requirements or limitations may apply when
installed in some countries of the European Union. This includes special
in-country licensing and/or limited channels of operation when installed
indoors or outdoors. For the most up to date restriction and limitations go to
www.extremenetworks.com/go/rfcertification.htm.
WARNING!
The user / installer is responsible to ensure the Altitude 300-2
TM
is operated
according to channel limitations, indoor / outdoor restrictions, license
requirements and within power level limits for the current country of operation.
A configuration utility has been provided with the PoE WLAN switch to allow the
end user to check the configuration and make necessary configuration changes
to ensure proper operation in accordance with the spectrum usage rules for
compliance with the European R&TTE directive 1999/5/EC. See the software
manual of PoE WLAN switch for detailed instructions on use of this utility.
NOTE
The Altitude 300-2
TM
is completely configured and managed by the PoE WLAN
switch connected to the Altitude 300-2
TM
. Please see software manual of PoE
WLAN switch to properly configure the Altitude 300-2
TM
.
• The Altitude 300-2
TM
wireless port requires the end user / installer to enter
the correct country code into the PoE WLAN switch software to allow for
proper configuration in conformance with European National spectrum usage
laws that match the country in which the device is operating.
• After the first Altitude 300-2
TM
wireless port is connected to the PoE WLAN
switch each additional wireless port connected will inherit the operating
configuration of the first Altitude 300-2
TM
wireless port. The user / installer
is responsibility to ensure the first Altitude 300-2
TM
wireless port is properly
configured.
• The software within the PoE WLAN switch will automatically limit the
allowable channels and output power determined by the current country
code entered. Incorrectly entering the country of operation, selecting the
correct indoor / outdoor setting or identifying the proper antenna used, may