Filter
Top Products
46
11 ³]©w½sµ{¼½©ñ (Äò)
5. Press the or key until the cursor is over the word “ Start “
Click on “ ENTER “ to begin the play of songs in the programmed
order.
6. If you wish to clear one selection from the program list, select that
song and use the
or key to select “ C “(CLEAR) on the right
side of the screen and press the “ ENTER “ key. This will clear the
song from the play list and allow you to add a new one.
7. If you wish to clear the entire play list, follow the instructions above,
but select “ C “and press the “ ENTER “key.
In the event you wish to cancel programming actions dur-
ing the programming process, use the
or key to
select the “ RETURN “field at the bottom of the screen.
This will allow you to exit this screen and cancel unsaved
changes.
When playing a programmed sequence, if the “ “(STOP)
key is pressed followed by “
“(PLAY) the play list will
begin from the first song on the CD or VCD and pro-
grammed sequence play is cancelled. However, the pro-
grammed play list is still valid and can be selected again
by pressing the “ Program “and then the “ Start “key.
Press” “(STOP) if you wish to cancel a programmed
play currently running. All program play data is automati-
cally erased when the current disc is removed from the
player.
When you are playing a 2.0 version VCD, the PBC func-
tion must be disabled before it is possible to program
playing the sequence.
9. Programmed Play