EPSON Stylus Color 900 Revision C
Adjustment Adjustments 140
9. Type exactly the 22-digit Head ID you made a note of. If you type a
wrong ID, the program automatically calculates and detects it. The
screen returns to the ID input screen. The following screen shows
the process the program takes for a wrong ID. In this screen, press
Enter, and the screen returns to the Head ID Input Screen (Figure
5-8).
Figure 5-11. Screen for ID Correction (for New ROM)
10. When the 22-digit ID has been correctly input, the following 3
screens appear in sequence as shown in Figure 5-12, and the ID is
registered in the printer’s RAM. (Though the screen messages
indicate that the ID has been input in the EEPROM, it is actually
written into the EEPROM when the printer is turned off.)
11. Press ESC key twice. The screen returns to the sub adjustment
menu screen to continue to the next adjustment.
Figure 5-12. 22-digit ID Input Sequence
Enter the 22-digit voltage ID
* New ROM *
HEAD ACTUATOR VOLTAGE ID =
HEAD ACTUATOR VOLTAGE ID is correctly accepted.
W ritin g n o w o n E E P R O M .
Reading and coverting now for confirm ation.
As the head actuator voltage, 04B434D4852500000000S
h a s b e e n w ritte n in E E P R O M .
As the head actuator voltage, 04B434D4852500000000S
h a s b e e n w ritte n in E E P R O M .
ESC: Previous
