Reinstalling System Software Using Recovery Mode
7-16 41-001190-01 Rel. 1.1, Rev. 00
AastraLink Pro 160 Administrator Guide
using its LAN connection.
AastraLink Recovery UI
Step Action
1 Confirm that the AastraLink is in recovery mode.
The LED should alternate Green/Red/Off to indicate that the device is in recovery mode.
2 If you have not yet accessed the AastraLink Recovery Mode UI, do this step. (Otherwise, skip ahead
to Step 3.) Use your web browser and enter the IP address of the AastraLink:
• If you are using DHCP, enter the IP address assigned to the device. For example:
http://10.50.20.104
• If you are using a direct, back-to-back connection between the AastraLink WAN port and your
PC, then enter the following address: http://192.168.100.100
The AastraLink Pro 160 Recovery Mode UI appears, as shown in Figure 7-1.
