A SERVICE OF

logo

Configuring Network Settings
41-001190-01 Rel. 1.1, Rev. 00 4-25
Configuring AastraLink Pro 160 System and Network Parameters
Use the following procedure to configure AastraLink remote office support.
AastraLink Web UI
Step Action
1Select Configuration->Network->Local Services.
2 The “Remote Office” field is disabled by default. To enable remote office support, set Remote Office
to On.
3 The “UPnP” field is disabled by default. Set UPnP to <Off> or <On>, as required by your specific
network configuration.
See the UPnP parameter description on page page 4-20 for more information.