AastraLink Pro 160 Hardware and Software
41-001190-01 Rel. 1.1, Rev. 00 1-11
Getting Started
AastraLink Pro 160 Hardware and Software
Hardware Requirements
Note: IP Phone Model 53i supports the 536M. IP phone Models 55i, 57i, and 57i CT support the
536M and the 560M. Daisy-chained expansion modules are not recognized by the AastraLink Pro
160. The AastraLink Pro 160 supports a maximum of one expansion module per phone.
Hardware Minimum requirements
AastraLink Pro 160 Includes:
• One AastraLink Pro 160 unit.
• One 12V AC power adapter and cable.
• One RJ45 Ethernet cable.
• Six RJ11 phone cables.
• One 512 MB CompactFlash memory card.
• One set of rack mounting brackets with four
Phillips head screws.
• One wall mounting template, 3 plastic wall
anchors, and 3 Phillips panhead screws.
• One Quick Start Administrator’s guide.
Additional Equipment required
(but not included)
At least one Aastra IP Phone. The Aastra IP
phones and expansion modules supported in this
release include these models:
• 9143i
• 9480i, 9480i CT
•51i
•53i
•55i
• 57i, 57i CT
• 536M, 560M
