Configuring Network Settings
4-24 41-001190-01 Rel. 1.1, Rev. 00
AastraLink Pro 160 Administrator Guide
Configuring Remote Office Support
If you are installing and supporting Aastra IP phones at a remote site - for
example, a home office - you need to enable remote office support on the
AastraLink Pro 160.
Note the following information about configuring remote office support:
• The procedure for configuring remote office support varies slightly,
depending on whether or not you installed your AastraLink Pro 160 behind a
UPnP enabled/supported router. Refer to the UPnP parameter description on
page 4-20 before you begin the procedure described in this section.
• You must initially configure phones intended for remote locations at the
central office before deployment.
For complete instructions on configuring your Aastra IP phones for remote
deployment, see the following in this guide:
— Appendix A, “Remote Office Configuration of the IP Phone
(Phone-Side)”
— Appendix B, “Remote Office Configuration of the AastraLink Pro 160
(Server-Side)”
