Filter
Top Products
45
GB
Other Recording Operations
• When the remaining recordable time is less
than 10 seconds, the pre-recording function
is disabled. Before starting to use the
pre-recording function, erase unwanted files.
• When 60 minutes have passed after the IC
recorder entered the standby mode in step 5,
the standby mode will be canceled and
recording stops.
• If you stop recording before step 6, sounds
buffered in the memory will not be saved.
To cancel the pre-recording
function
Set “PRE REC” to “OFF” in step 2.
Starting to record
automatically in response to
sound – the VOR function
You can set the VOR (Voice Operated
Recording) function to “ON,” to make the
IC recorder start recording when the IC
recorder detects sound, and pause when no
sound is heard, eliminating recording
during soundless periods.
1 Select the (Recording) tab t “VOR”
in the menu when the IC recorder is in
the stop or recording mode, and then
press
N/ENT.
2 Press v or V on the control button to
select “ON,” and then press
N/ENT.
“VOR” is set to “OFF” when you
purchase the IC recorder.
3 Press x STOP to exit the menu mode.
4 Press z REC/PAUSE.
“ ” appears in the display
window.
The recording pauses when no sound is
detected and “ ” flashes. When
the IC recorder detects sound again, the
recording starts again.
N/ENT
z REC/PAUSE
x STOP
v, V