Filter
Top Products
141
GB
Troubleshooting
File Full • When there are already the maximum number of files in the
selected folder or the total number of files stored on the IC
recorder has exceeded the maximum, you cannot record a new
file. Erase some files before recording.
File Damaged • You cannot play back or edit files, because the data of the selected
file is damaged.
Format Error • The IC recorder cannot be turned on using the computer because
there is no copy of the control file required for operation. Format
the IC recorder using the formatting function in the menu
(page 102).
Process Error • The IC recorder failed in memory access. Remove and then re-
insert the batteries.
• Save a backup copy of your data and format the IC recorder using
the menu (page 102).
Stop and Reinsert Memory
Card
• A memory card was inserted during recording or playback.
Remove the memory card and insert it while the IC recorder is in
the stop mode.
Set Date&Time • Set the clock; otherwise, you cannot set the alarm.
Set Add/Overwrite • “Add/Overwrite” in the menu is set to “OFF.” You cannot add a
recording or an overwrite recording (page 91).
Track Marks are Full • You can set up to 98 track marks for a file. Cancel unwanted track
marks (page 77).
No File • The selected folder does not have any files. You cannot move a
file or set the alarm, etc., because of this.
No Track Marks • There are no track marks when you attempt to erase or locate a
track mark.
No Setting • If you have not set the alarm, the alarm list will not be displayed.
Make the alarm setting for “New” (page 68).
Message Cause/Remedy