Filter
Top Products
19
Timer and sleep operation (Remote control only)
Timer playback:
The unit turns on and plays the desired source (CD, TUNER, USB,
iPod, AUDIO IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer:
Once timer play works for one time only at a preset time.
(“
” indicator).
Daily timer:
Daily timer play works at the same preset time every day. For
example, set the timer as a wake-up call every morning.
(“DAILY” indicator).
Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio programme, and
use the daily timer to wake up.
1 Set the daily timer (pages 19 - 20).
2 Set the once timer (pages 19 - 20).
1 minute or more
Daily timer Once timer
Start Stop Start Stop
Timer playback
Before setting timer:
z Check that the clock is set to the correct time (refer to page 6).
If it is not set, you cannot use the timer function.
z
For timer playback: Plug in USB or load discs or dock
iPod to be played.
1 Press the ON/STAND-BY button to turn the power on.
2 Press and hold the CLOCK/TIMER button.
3 Within 10 seconds, press the
or button to select
“ONCE” or “DAILY”, and press the ENTER button.
4 Within 10 seconds, press the
or button to select
“TIM.SET”, and press the ENTER button.
5 To select the timer playback source (CD, TUNER, USB, iPod,
AUDIO IN), press the
or button.
When you select the tuner, select a station by pressing the
or button, and then press the ENTER button.
If a station has not been programmed, “NOPRESET” will be
displayed and timer setting will be cancelled.
6 Press the ENTER button to adjust the hour. Press the
or
button and then press the ENTER button.
7 To adjust the minutes, press the
or button and
then press the ENTER button.
8 Set the time to fi nish as in steps 6 and 7 above.
9 Adjust the volume using the VOLUME control, and then press
the ENTER button. Do not turn the volume up too high.
10 Press the ON/STAND-BY button to enter the power stand-by
mode. The “TIMER” indicator lights up and the unit is ready for
timer playback.
REMOTE
SENSOR
TIMER
11 When the preset time is reached, playback will start. The
volume will increase gradually until it reaches the preset
volume. The timer indicator will blink during timer playback.
12 When the timer end time is reached, the system will enter the
power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every selected day. It will
continue until the daily timer setting is cancelled. Cancel the
daily timer when it is not in use.
Notes:
z When performing timer playback using another unit connected to
the USB terminal or AUDIO IN socket, select “USB” or “AUDIO
IN” in step 5. However, if the source is set to USB, make sure
there is no iPod or iPhone docked to the unit.
z This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn on or off.
To stop the timer playback, follow step “Cancelling the timer
setting” of this page.
Checking the timer setting:
1 Turn the power on and press and hold down the CLOCK/TIMER
button.
2 Within 10 seconds, press the
or button to select
“ONCE” or “DAILY”, and press the ENTER button.
3 Within 10 seconds, press the
or button to select
“TIM.CALL”, and press the ENTER button.
Cancelling the timer setting:
1 Turn the power on and press and hold down the CLOCK/TIMER
button.
2 Within 10 seconds, press the
or button to select
“ONCE” or “DAILY”, and press the ENTER button.
3 Within 10 seconds, press the
or button to select
“TIM.OFF”, and press the ENTER button. Timer will be cancelled
(the setting will not be cancelled).
GX-M10H_OM_UK_SCA.indd Sek1:19GX-M10H_OM_UK_SCA.indd Sek1:19 2012-08-17 00:07:542012-08-17 00:07:54