Filter
Top Products
14
Advanced USB playback
The following functions are the same as CD operations:
Page
Direct track search ....................................................................10
Repeat play ................................................................................10
Random play.............................................................................. 11
Programmed play (MP3/WMA) ................................................ 11
Note:
If USB memory device is not connected, “NO MEDIA” will be
shown on the display.
Notes:
z This unit only supports “MPEG-1 Audio Layer-3” format.
(Sampling Frequency is 32, 44.1, 48kHz)
z Playback order for MP3 fi les may differ depending on the writing
software used during fi le download.
z Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
z For MP3/WMA fi les, please put “.MP3” “.WMA” extension. Files
cannot be played back if there is no MP3/WMA extension.
z Playlists are not supported on this unit.
z This unit can display Folder Name or File Name up to 32
characters.
z Maximum total number of MP3/WMA fi les is 65025.
z Total number of folders read is 999 including folder with non-
playable fi le. However, the display shows only folder with MP3
fi les.
z The display playback time may not be displayed correctly when
playing back a variable bitrate fi le.
z The ID3TAG information supported are TITLE, ARTIST and
ALBUM only. Title name, artist name and album name can be
displayed by pressing the DISPLAY button during fi le playback
or pause mode.
z WMA meta tag also supports title, artist and album name which
are recorded in WMA fi les. Copyright protected WMA fi les
cannot be played back.
Listening to the radio
PORTABLE MUSIC BOOMBOX GX-M10
REMOTE
SENSOR
TIMER
Tuning
Note:
This product can receive FM stereo and FM monoaural
brodcasts.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER button on the remote control or TUNER/
AUDIO IN button on the main unit repeatedly to select FM
Stereo or FM Mono.
3 Press the TUNING (
or ) button on the remote control to tune
in to the desired station.
z Manual tuning:
Press the TUNING (
or ) button repeatedly to tune in to
the desired station.
z Auto tuning:
When the TUNING (
or ) button is pressed for more than
0.5 seconds, scanning will start automatically and the tuner
will stop at the fi rst receivable broadcast station.
Notes:
z When radio interference occurs, auto scan tuning may stop
automatically at that point.
zAuto scan tuning will skip weak signal stations.
z To stop the auto tuning, press the TUNING (
or ) button
again.
z When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed fi rst, and then the RDS indicator will
light up. Finally, the station name will appear.
z Full auto tuning can be achieved for RDS stations “ASPM”, see
page 16.
To receive an FM stereo transmission:
z Press the TUNER button to select stereo mode and “ST”
indicator will be displayed. “
” will appear when an FM
broadcast is in stereo.
z If the FM reception is weak, press the TUNER button to extinguish
the “ST” indicator. The reception changes to monaural, and the
sound becomes clearer.
GX-M10H_OM_UK_SCA.indd Sek1:14GX-M10H_OM_UK_SCA.indd Sek1:14 2012-08-17 00:07:502012-08-17 00:07:50