Filter
Top Products
11
Advanced CD or MP3/WMA disc playback (continued)
Random play
The tracks on the disc can be played in random order
automatically.
To random play all tracks:
Press and hold PLAY MODE button on the remote control until
“RANDOM” appears. Press the CD
/ button.
To cancel random play:
Press the PLAY MODE button again. “RDM” indicator will
disappear.
Notes:
z If you press the
button during random play, you can
move to the track selected next by the random operation. On
the other hand, the
button does not allow you to move
to the previous track. The beginning of the track being played
will be located.
z In random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
Programmed play (CD
You can choose up to 32 selections for playback in the order you
like.
1 Whilst in the stop mode, press the MEMORY button on the
remote control to enter the programming save mode.
2 Press the numeric button or
or buttons on the
remote control to select the desired track.
3 Press the MEMORY button to save the track number.
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be
programmed. If you want to check the programmed tracks,
press the MEMORY button repeatedly. If you make a mistake,
the programmed tracks can be cleared by pressing the CLEAR
button for more than 2 seconds.
5 Press the CD
/ button to start playback.
Programmed play (MP3/WMA)
1 Whilst in the stop mode, press the MEMORY button to enter the
programming save mode.
2 Press the TUNING (
or ) button on the remote control to
select the desired folder.
Then press the
or button on the remote control to
select the desired tracks.
3 Press the MEMORY button to save the folder and track
number.
4 Repeat steps 2 – 3 for other folder/tracks. Up to 32 tracks can
be programmed.
5 Press the CD
/ button to start playback.
To cancel the programmed play mode:
During programmed stop mode, press the DEMO/(DIMMER)/
button. The display will show “MEM CLR” and all the programmed
contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEM” indicator
will be displayed. Press the MEMORY button. Then follow steps
2 - 3 to add tracks.
Notes:
z When a CD compartment door is opened, the programme is
automatically cancelled.
z If you press the ON/STAND-BY button to enter the stand-
by mode or change the function from CD to another, the
programmed selections will be cleared.
z During the programme operation, random play is not possible.
GX-M10H_OM_UK_SCA.indd Sek1:11GX-M10H_OM_UK_SCA.indd Sek1:11 2012-08-17 00:07:492012-08-17 00:07:49