Filter
Top Products
Adjusting initial settings
1
1
1
1
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1 Function display
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2 Press FUNCTION and hold until function
name appears in the display.
3 Press FUNCTION to select one of the in-
itial settings.
Press FUNCTION repeatedly to switch be-
tween the following settings:
Calendar—Clock—CLOCK (off clock)—FM
(FM tuning step)—A-PI (auto PI seek)—
WARN (warning tone)—AUX1 (auxiliary
input1)—AUX2 (auxiliary input2)—R-SP (rear
output and subwoofer controller)—TEL (tele-
phone muting/attenuation)
Use the following instructions to operate each
particular setting.
# To cancel initial settings, press BAND.
Setting the date
You can adjust the calender display, which
can be displayed when the sources are off.
1 Press FUNCTION to select calendar.
Press FUNCTION repeatedly until calendar ap-
pears in the display.
2 Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the calendar display:
Day—Month—Year
As you select segments of the calendar dis-
play the segment selected will blink.
3 Push MULTI-CONTROL up or down to
set the date.
Pushing MULTI-CONTROL up will increase
the selected day, month or year. Pushing
MULTI-CONTROL down will decrease the se-
lected day, month or year.
Setting the clock
Use these instructions to set the clock.
1 Press FUNCTION to select clock.
Press FUNCTION repeatedly until clock ap-
pears in the display.
2 Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the clock display:
Hour—Minute
As you select segments of the clock display
the segment selected will blink.
Initial Settings
En
63
English
Section
13