Filter
Top Products
2 Push MULTI-CONTROL left or right to
select the repeat range.
Push MULTI-CONTROL left or right until the
desired repeat range appears in the display.
! RPT:DSC – Repeat all tracks
! RPT:TRK – Repeat just the current track
! RPT:FLD – Repeat the current folder
Notes
! If you select another folder during repeat play,
the repeat play range changes to RPT:DSC.
! If you perform track search or fast forward/re-
verse during RPT:TRK, the repeat play range
changes to RPT:FLD.
! When RPT:FLDis selected, it is not possible
to play back a subfolder of that folder.
! When you select RPT:FLD for the repeating
range and return to the playback display,
FRPT is displayed.
Playing tracks in random order
Random play lets you play back tracks in a
random order within the repeat range,
RPT:FLD and RPT:DSC.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select RDM.
Press FUNCTION until RDM appears in the
display.
3 Push MULTI-CONTROL up to turn ran-
dom play on.
Tracks will play in a random order within the
previously selected RPT:FLD or RPT:DSC
ranges.
# To turn random play off, push
MULTI-CONTROL down.
Note
If you turn random play on during RPT:FLD and
then return tothe playback display, FRDM ap-
pears in thedisplay.
Scanning folders and tracks
While you are using RPT:FLD, the beginning
of each track in the selected folder plays for
about 10 seconds. When you are using
RPT:DSC, the beginning of the first track of
each folder is played for about 10 seconds.
1 Select the repeat range.
Refer to Repeating play on the previous page.
2 Press FUNCTION to select SCAN.
Press FUNCTION until SCAN appears in the
display.
3 Push MULTI-CONTROL up to turn scan
play on.
The first 10 seconds of each track of the cur-
rent folder (or the first track of each folder) is
played.
4 When you find the desired track (or
folder) push MULTI-CONTROL down to turn
scan play off.
The track (or folder) will continue to play.
# If the display has automatically returned to
the playback display, select SCAN again by using
MULTI-CONTROL.
Notes
! After track or folder scanning is finished,nor-
mal playback of the tracks will begin again.
! If you turn scan play on during RPT:DSC and
then return tothe playback display, FSCN ap-
pears in thedisplay.
MP3/WMA/WAV Player
En
28
Section
07