Filter
Top Products
Operating the hands-free
phoning details menu
1
1
1
1
1 Function display
Shows the function status.
1 Press FUNCTION and hold until phone
user setting (e.g., PHONE 1, P1) appears in
the display, then press FUNCTION to dis-
play the function names.
After phone user setting is displayed, press
FUNCTION repeatedly to switch between the
following functions:
If not registered yet.
P1 (phone user 1 registration)—P2 (phone
user 2 registration)—P3 (phone user 3 regis-
tration)—P4 (phone user 4 registration)—P5
(phone user 5 registration)—PG (guest user re-
gistration)—AUTO ANSWER (automatic an-
swer setting)—ECHO CANCEL (echo cancel)
—RING TONE (ring tone select)—R-COLOR
(illumination color setting)—AUTO CONNECT
(automatic connection setting)—
DEVICE INFO (device information)
If already registered and connected.
PHONE (registered phone)—
P BOOK TRANSFER (phone book transfer)—
P BOOK NAMES (phone book name order)—
CLR MEMO (clear memory)—
AUTO ANSWER (automatic answer setting)—
ECHO CANCEL (echo cancel)—RING TONE
(ring tone select)—R-COLOR (illumination
color setting)—AUTO CONNECT (automatic
connection setting)—DEVICE INFO (device in-
formation)
# If guest phoneis connected to this unit via
Bluetooth wireless technology,
P BOOK TRANSFER and P BOOK NAMES cannot
be selected.
# If cellular phone is connected to this unit via
Bluetooth wireless technology with HSP (Head
Set Profile), P BOOK TRANSFER,
P BOOK NAMES and CLR MEMO cannot be se-
lected.
2 Press BAND to return to the standby
display.
Registering your cellular
phone
This unit can recognize up to six cellular
phones: five registered cellular phones and
one guest cellular phone. Before using this
unit’s hands-free phoning, phone registration
is required.
! When you register another cellular phone
to this unit, first disconnect the currently
connected cellular phone from this unit.
(Refer to Disconnecting a cellular phone on
page 38.)
Searching and registering
cellular phones
1 Press FUNCTION and hold until phone
user setting (e.g., PHONE 1, P1) appears in
the display, then press FUNCTION to select
one of the phone user settings.
After phone user setting is displayed, press
FUNCTION until the desired phone user set-
ting (e.g., P1) appears in the display.
Bluetooth Telephone
En
35
English
Section
08