Filter
Top Products
Watching the television
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
5
5
5
You can use this unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the
TV tuner’s operation manual. This section pro-
vides information on TV operations with this
unit which differs from that described in the
TV tuner’s operation manual.
1 Band indicator
Shows which band the TV tuner is tuned to.
2 Preset number indicator
Shows which preset has been selected.
3 Channel indicator
Shows which channel the TV tuner is tuned.
4 Battery strength indicator
Shows the battery strength of cellular
phone.
! Battery strength indicator may differ
from the actual battery strength.
5 Signal level indicator
Shows the signal strength of cellular phone.
! Signal level indicator may differ from the
actual signal level.
1 Press SOURCE to select the TV.
Press SOURCE until you see TELEVISION dis-
played.
2 Press BAND to select a band.
Press BAND until the desired band is dis-
played, TV1 or TV2.
3 To perform manual tuning, push
MULTI-CONTROL left or right.
The channels move up or down step by step.
4 To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by pushing
MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right, you can skip broadcasting channels. Seek
tuning starts as soon as you release
MULTI-CONTROL.
Storing and recalling
broadcast stations
If you press any of the preset tuning buttons
1–6, you can easily store up to six broadcast
stations for later recall with the touch of a but-
ton.
% When you find a station that you want
to store in memory, press one of preset
tuning buttons 1–6 and hold until the pre-
set number stops flashing.
The number you have pressed will flash in the
preset number indicator and then remain lit.
The selected station has been stored in mem-
or y.
The next time you press the same preset tun-
ing button the station is recalled from mem-
or y.
Notes
! Up to 12stations, six for each of twoTV bands
can be storedin memory.
! You can also recall station assigned to preset
tuning buttons 1–6 by pushing
MULTI-CONTROL up or down.
TV tuner
En
56
Section
11