Filter
Top Products
8 Push and hold MULTI-CONTROL right
until the beep sounds after editing name.
The entered name is stored in memory.
Clearing memory
You can clear memory of each item; Phone
Book, dialled/received/missed call history list
and preset phone number.
1 Press FUNCTION and hold until phone
user setting (e.g., PHONE 1) appears in the
display, then press FUNCTION to select
CLR MEMO.
After phone user setting is displayed, press
FUNCTION until CLR MEMO appears in the
display.
2 Push MULTI-CONTROL left or right to
select the desired item.
Each time MULTI-CONTROL is pushed left or
right, the items are selected in the following
order:
PH BOOK (phone book)—MISSED (missed
call history)—DIALLED (dialled call history)—
RECEIVE (received call history)—PRESET (pre-
set phone numbers)—ALL (delete all memory)
# If you select ALL, all memory regardless of
items will be cleared.
# If guest phoneis connected to this unit via
Bluetooth wireless technology, PH BOOK cannot
be selected.
3 Push MULTI-CONTROL up to determine
the item that you want to delete from this
unit.
CLEAR MEMORY:YES is displayed. Clearing
memory is now on standby.
# If you do not want to clear memory that you
have selected, push MULTI-CONTROL down to
return to CLRMEMO.
4 Push and hold MULTI-CONTROL up to
clear the memory.
CLEAR is displayed and data on the selected
item is cleared from this unit’s memory.
Using the Call History
The ten most recent calls made (dialled), re-
ceived and missed, together with their times
and dates, are stored in the Call History. You
can browse the Call History and call numbers
from it.
Displaying the Call History
The Call History is divided into three groups:
Missed calls, Dialled calls, and Received calls.
You can see the time and date of the call, as
well as the number (and name if the number
is in the Phone Book).
1 Press FUNCTION to select the desired
list.
Press FUNCTION to select the list for making
a call from among MISSED LIST,
DIALLED LIST and RECEIVED LIST.
# If no phonenumbers have been stored in the
selected list, NO DATA is displayed.
2 Push MULTI-CONTROL up or down to
select the desired phone number.
Each time MULTI-CONTROL is pushed up or
down, the phone number stored in the list is
changed.
# If a callyou received is anonymous, reception
date and timeare displayed.
Switching the display
1 Display the list and select a phone num-
ber.
Refer to Displaying the Call History on this
page.
Bluetooth Telephone
En
41
English
Section
08