Filter
Top Products
JPEG
KH 6777
the display on the front of the DVD Player, while “ “ will be
displayed on the television screen.
Terminating picture display (Stop)
To terminate the display of a picture, press the “Stop”
button on the front of the DVD Player, or on the remote
control, once.
... with Resume Function
If you have terminated the display of pictures on the loaded
CD-R/CD-RW by pressing the “Stop” button once, then the
DVD Player will automatically store the point at which pic-
ture display was stopped (“Resume Function”). As soon as
the “Play” button on the front of the DVD Player or on the
remote control is depressed once again, picture display from
the stored point is continued.
... without Resume Function
If you have terminated the display of pictures on the loaded
CD-RW by pressing the “Stop” button once, and then press
the “Stop” button a second time, then the stored point at
which picture display was terminated will be displayed. The
television screen will once again display the CD-R menu.
Jump to the next/previous picture (Skip)
Use the “Skip Forward” and “Skip Back” buttons on the
front of the DVD Player, or on the remote control, during
picture display to jump between the pictures of the loaded
CD-R/CD-RW, either …
• forward to the next picture, or
• back to the previous picture.
The selected picture is instantly displayed. The number of
the displayed picture is indicated on the display on the front
of the DVD Player.
The Skip function can be used to jump only between the
next/previous picture of the current sub-folder.
Turning pictures
The currently displayed picture can be turned in increments
of 90° while the picture is being shown. For this purpose
press the “Angle” button on the remote control; the picture
is turned by 90° with each depression of the “Angle” button.
The selected turning increment – between 90° and 270° - is
shown on the television screen.
Renewed depression of the “Angle” button for a picture that
has already been turned by 270° will turn the picture to its
original position, and “Original” will be shown on the televi-
sion screen.
Please note:
Picture turning does not function when picture dis-
play is in Pause mode.
Direct picture selection
The pictures on a CD-R/CD-RW can be directly selected by
one of the following entry functions instead of the control
buttons and :
Entering the picture number with the
numeral buttons
Proceed in the following manner to select a picture directly by
entering the picture number with the numeral buttons …
1 During picture display, or when picture display has been
stopped/terminated, enter the title number with the cor-
responding numeral keys on the remote control – e.g. the
“3” button for the third picture, or consecutively the “1”
and “0” buttons for the tenth picture. The entered num-
bers are displayed on the television screen.
2 Then press the “OK” button on the remote control once.
The picture with the entered number will be instantly
displayed.
If there are folders: Only pictures in the current sub-
folder can be selected by direct picture selection.
Picture selection via the search function
(Search)
Proceed in the following manner for direct picture selection
by way of the search function …
1 Press while the CD-R menu is faded in the “Search” button
on the remote control once.
2 The “Search” menu is shown on the television screen:
Search
Track – – – –
3 Enter with the numeral buttons 0 to 9 on the remote
control the number of the picture you wish to display.
The picture number can be composed of one to four
digits.
If there are folders: Only the pictures in the current sub-
folder can be selected with the numeral buttons.
4 Press the “OK” button on the remote control once to in-
stantly display the selected picture.
IB_KH6777_EN 23.09.2003, 0:57 Uhr50