Filter
Top Products
KH 6777
1
2
1 Insert a chinch cable in the…
• “FL“ socket (front left channel)
• “FR“ socket (front right channel)
• “SL“ socket (rear left channel)
• “SR“ socket (rear right channel)
• “CENTER“ socket (front middle channel) and
• the “SUBWOOFER“ (Bass) socket
… at the back of the DVD Player.
2 Connect the chinch cable with the corresponding analog
inputs on the digital audio component.
11. Necessary settings on the DVD Player
prior to operation
All settings on the DVD Player player can be eected with the
remote control via the so-called “OnScreen Display” menu
(abbreviated “OSD” menu). The OSD menu is superimposed
on the television screen.
Before using the DVD Player for the rst time to play DVDs,
VCDs/S-VCDs or audio-/MP3-CDs, a few settings have to be
made by way of the OSD menu. The actual settings depend,
among other things, on …
• The language in which the OSD menu is to be shown.
• The television standard of the television to which the
DVD Player is to be connected.
• The picture format that can be presented by the televi-
sion.
Proceed in the following manner to eect the necessary set-
tings by way of the OSD menu …
1 First insert the power cable plug of the DVD Player into
a mains socket.
2 To switch on the DVD Player press the “Power” button on
the front of the DVD Player. If the DVD Player has already
been switch on and is in standby mode, then press the
“Standby” button on the remote control once to turn on
the DVD Player.
“Load” will then start to ash on the display on the front
of the DVD Player, which is then followed by “NoDisc”. The
following appears on the television screen:
3 Study the following brief instructions to familiarize yourelf
with the operation of the OSD menu:
.. Operating the OSD menu
Proceed in the following manner to call the OSD menu of
the DVD Player ...
4 Press the “Setup” button on the remote control once. The
OSD menu with its menu items are displayed on the tel-
evision screen:
Language Video Audio MoreAud Parental
5 The “Language” menu item is the rst to be automatically
selected. The individual menu items can now be selected
with the control buttons and on the remote control,
and called by pressing the “OK” button on the remote
control. The sub-menu of the selected menu item will
then be displayed.
IB_KH6777_EN 23.09.2003, 0:56 Uhr15