Filter
Top Products
KH 6777
instructions for the given television, or turn to the
Glossary in the instructions to nd the explanation
under the headword “Television Standard”.
➧
For this subject please refer to Chapter 19. “Glossary/
Index”.
Setting Video Output
9 Press the control button once to select the menu sub-
item “Video Output”
10 Conform by pressing the “OK” button once. The available
options for the sub-item “Video Output” will now be dis-
played:
RGB
Setting to connect the DVD Player to an RGB-capable
television with a 21-pin SCART cable
S-Video
Setting to connect the DVD-Player via S-Video
YUV
Setting to connect the DVD-Player via component
signal
YPbPr
Setting to connect the DVD-Player via component signal
YPbPr (Progressive Scan)
Warning!
In the event that the wrong video output is set – e.g.
“YpbPr” although the television is not Scan-capable –
then the television screen may suddenly turn black.
This is not a defect of the television or DVD Player!
In such an event …
• Press once the “Stop” button on the front panel
of the DVD Player or on the remote control and
• then continue pressing the “Video Out” button on
the remote control until the picture reappears on
the television screen.
11 Then select with the control buttons and the setting
for the video output that matches the connection of the
DVD Player with the television.
12 Conrm the selection by pressing the “OK” button once,
thereby concluding the video setting procedure.
13 Press the control button three times to return to the
OSD menu bar.
.. Audio settings
1 Press the control button twice to select the “More Aud”
menu item.
2 The “More Aud“ menu with the following sub-items and
the current settings for each sub-item will now be dis-
played on the television screen:
Sprache Video Audio More Aud Parental
Prologic Off
Digital Ouput Raw
Setting Prologic
3 The “Prologic“ menu sub-item is the rst to be automati-
cally selected. Press the “OK” button once. The available
options for the “Prologic” sub-item will be displayed on
the television screen:
Off
Set “O” if an amplier, receiver or HiFi system not com-
patible with Dolby Prologic is connected to the analog
stereo output (“FL” and “FR” chinch sockets) of the DVD
Player
On
Set “On” when an amplier, receiver or HiFi system com-
patible with Dolby Prologic is connected to the analog
stereo output (via chinch cable in the “FL” and “FR” chinch
sockets) of the DVD Player, as described in the Chapter
“Connecting a HiFi System”. In this instance it will be
additionally necessary to set “Stereo Downmix” in the
speaker settings.
➧
For this subject please refer to Chapter 11.4. “Audio Set-
tings: Setting Speaker Sizes – Stereo-Downmix“.
4 Select with the control buttons and between the
options “On” and “O”. Conrm the choice by pressing
the “OK” button once.
Setting Digital Output
5 Press the control button once to select the menu
sub-item “Digital Output”. Press the “OK” button once to
IB_KH6777_EN 23.09.2003, 0:56 Uhr18