JVC HR-DVS3U MP3 Player User Manual


 
Masterpage:Right-Full-NoTitle0
EN
75
Filename [DVS3U_4-EN.fm]
Page 75 January 10, 2002 10:49 am
VHS MODE SET (cont.)
* The default setting is
bold
in the table below.
8
VIDEO STABILIZER
ON
OFF
When this function is set to ON, you can automatically correct vertical vibration
in the picture when playing back unstable recordings made on another VCR.
NOTES:
When you finish viewing a tape, be sure to set this function to “OFF”.
Regardless of the setting, this function has no effect during recording and during special effects
playback.
The on-screen display may jitter vertically when this function is set to “ON”.
To watch recordings with close-caption, set this function to “OFF”.
Video Stabilizer and Digital TBC/NR cannot be used at the same time. If you activate Digital
TBC/NR when “VIDEO STABILIZER” is set to “ON”, Video Stabilizer will be automatically
turned “OFF”.
8
DIGITAL R3
ON
OFF
When this function is set to ON, the Digital R3 picture system applies edge
correction to the luminance signal to enhance details.
NOTES:
Normally it is recommended to keep “DIGITAL R3” set to “ON”.
Depending on the type of tape being used, picture quality may be better with “DIGITAL
R3” set to “OFF”.
If you use the VCR as the source player for editing, be sure to set “DIGITAL R3” to “OFF”
before starting.
8
AUDIO MONITOR
HI-FI
HI-FI L
HI-FI R
NORM
MIX
This VCR can record two sound tracks simultaneously (normal and Hi-Fi) on a Hi-Fi
stereo tape. You can select the sound track(s) to listen to while playing back a Hi-Fi
stereo tape. In addition, when playing back a prerecorded tape containing two
separate audio programs on the Hi-Fi tracks, you can choose either one by
selecting either HI-FI L or HI-FI R.
HI-FI
: Normally select this. Hi-Fi sound is played back.
HI-FI L
: Sound on the left Hi-Fi channel is played back.
HI-FI R
: Sound on the right Hi-Fi channel is played back.
NORM
: Sound on the normal track is played back.
MIX
: Both sounds on the Hi-Fi track and normal track are mixed and
played back.
NOTES:
While playing back a monaural tape, sounds on the normal track will be heard regardless of
this setting.
You can also use the
A. MONITOR
button on the Remote to select the desired monitor
sound. (
pg. 31)
DVS3U_1-EN.book Page 75 Thursday, January 10, 2002 10:51 AM