Filter
Top Products
Masterpage:Right-Full-NoTitle0
EN
71
Filename [DVS3U_4-EN.fm]
Page 71 January 10, 2002 10:49 am
MODE SET
* The default setting is
bold
in the table below.
8
REAR AUX INPUT
VIDEO
S-VIDEO
Select the appropriate mode depending on the connector being used on the rear
panel.
VIDEO
: To use the VIDEO input connector on the rear panel.
S-VIDEO
: To use the S-VIDEO input connector on the rear panel.
8
2ND AUDIO RECORD
ON
OFF
●
When this function is set to “ON”;
If a SAP program is received, the SAP audio is recorded on both the normal and Hi-
Fi tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on both the Hi-Fi and
normal tracks.
●
When this function is set to “OFF”,
the SAP audio cannot be recorded.
NOTES:
When the channel is changed on the VCR;
●
The “STEREO” indicator appears on the screen for about 5 seconds if the program is a
stereo broadcast.
●
The “SAP” indicator appears on the screen for about 5 seconds if the program is a SAP
broadcast.
●
Both indicators appear when a stereo program is accompanied by SAP sound.
8
AUTO TIMER
ON
OFF
When this function is set to “ON”, the timer is automatically engaged when the
VCR power is turned off, and automatically disengaged when the VCR is powered
back on.
NOTE:
For safety, when “AUTO TIMER” is set to “OFF”, all other VCR functions are disabled while
the Timer mode is engaged. To disengage the timer, press
TIMER
.
8
SUPERIMPOSE
ON
OFF
When this function is set to “ON”, various operational indicators appear on the TV
screen. Messages appear in the selected language (
੬
pg. 15).
NOTES:
●
When you use this VCR as the source player for editing, be sure to set “SUPERIMPOSE” to
“OFF” before starting.
●
During playback, the operation mode indicators may be disturbed depending on the type
of tape being used.
DVS3U_1-EN.book Page 71 Thursday, January 10, 2002 10:51 AM