Filter
Top Products
Filename [DVS3U_2-EN.fm]
Masterpage:Left
48
EN
Page 48 January 10, 2002 10:51 am
TIMER RECORDING (cont.)
24HR Quick
Programing
You can program a timer recording that starts within 24
hours using the ADVANCED JOG dial on the VCR.
A
Enter the program mode.
Press
24HR QUICK PROGRAM
on the VCR. The start
time indicator ( ) starts blinking on the front display
panel.
B
Set the program start/stop time and
channel.
Turn the
ADVANCED JOG
dial to the left or right to set
the time you want recording to start.
● One click stop of the
ADVANCED JOG
dial changes the time
in 5-minute intervals.
Push the
ADVANCED JOG
dial. The stop time indicator
( ) starts blinking on the front display panel. Turn the
ADVANCED JOG
dial to the left or right to set the time
you want recording to stop.
Push the
ADVANCED JOG
dial. Turn the
ADVANCED
JOG
dial to the left or right to select the channel you wish
to record.
● You can cancel the setting at any time by pressing and holding
the
ADVANCED JOG
dial for more than 3 seconds or pressing
CANCEL
on the Remote. Repeat the step
2
.
C
Engage the VCR’s timer mode.
Press
24HR QUICK PROGRAM
. The VCR turns off
automatically and “
#
” appears on the front display
panel.
● To disengage the timer mode, press
TIMER
or
24HR QUICK
PROGRAM
again.
Before performing the 24HR Quick Programing:
● Make sure that the VCR’s built-in clock is set properly.
● Select the deck.
● Set the tape speed.
●
For the VHS deck:
Insert a VHS (or S-VHS) cassette with the record safety tab
intact.
For the DV deck:
Insert a Mini DV cassette with the erase protection switch
set to “REC”.
1
32
DVS3U_1-EN.book Page 48 Thursday, January 10, 2002 10:51 AM