Filter
Top Products
Table of Contents
ida FS 250, Operator's Guide
-3-
Preface
September 1997
This manual applies to the ida FS 250 and the ida FS 250 PDS protocol
converters.
NOTE:
Both products: “ida FS 250” and “ida FS 250 PDS”
will be referred to as “ida FS 250” unless specific
reference is made to the IPDS functionality of the ida
FS 250 PDS.
The ida FS 250 supports twinax Centronics and RS232 inputs. The default
output is Centronics.
The manual describes how the ida FS 250 is connected and operated. Read it
before you start using the protocol converter and keep the manual in a safe
place for future reference.
It is assumed that the reader has a basic knowledge and understanding of
IBM computer systems, especially the IBM 5250 Information Display System.
It is also assumed that the reader has adequate knowledge of the printer
which is going to be connected to the ida FS 250.
The ida FS 250 can be used with all PCL 4/5 printers.
Related Manuals
ida FS 250 PDS
"MakeITDS"
Document No.: D60253
“MakeITDS for VM/MVS, Setup Guide”
Document No.: D60272
Both FS converters
"5250 Programmer's Guide"
Document no. D62079.