Filter
Top Products
Connecting to System
ida FS 250, Operator's Guide
-10-
2. Installation Requirements
Before connecting the ida FS 250, you should check the requirements
described in this chapter.
2.1 Environment requirements
The ida FS 250 protocol converter can be installed in the following
environment:
• Temperature range from 10° - 40°
• Humidity between 8-80 %, non-condensing
• Power consumption: 120 and 220 Volt version - max. 21.5 VA
WARNING!
The equipment must be grounded. Operation without a
ground may cause exposed metal parts to carry main voltage.
This can lead to malfunction and personal injury.
2.2 Pre-Installation Requirements
Prior to installation and connection you must first make sure that you have
set the desired national language - do this via the line (activating function
Y8). See the section: National Language Selection.
2.2.1 National Language Selection
Via the Line (Function 8)
Below is a short description of how you change national language via the line
(Function 8). For further details on programming the ida FS 250, please see
the chapter: Programming ida FS 250.
The commands shown in Figure 1-1 have to be sent to the ida FS 250 . You
can either do this in a file you transmit to the printer or by entering the
command sequence on your screen and making a local copy (print screen).