Filter
Top Products
TIMER RECORDING
57
WEEKLY
For weekly recording: To record a TV program at the same time on the same channel every
week. (Example: every Monday on channel 7 at 5:00 pm)
Press /PLAY or /STOP button to point to "WEEKLY". Then, press F.FWD/ button.
VCR PLUS+ PROG.
ONCE
DAILY
WEEKLY
4 Set the tape speed
Press /PLAY or /STOP button until your desired tape speed appears.(Example: SP)
ONE TIME PROGRAM
PROGRAM NUMBER 1
DATE 05/06 THUR
START TIME 07/ 30 PM
END TIME 08 / 30 PM
CHANNEL 16
REC SPEED SP
SP
SLP
5 Check that the program information is correct
• There are cases in which the program information does not match your area. If the incorrect
information appears, select the number you want to change using the /REW button. Then,
enter the correct numbers using the /PLAY or /STOP button.
Remember:
• If your cable box or satellite box is connected as in Fig 4 on page 11 or Fig 5 on page 12, the
local channel number (USER CH.) Then, set your cable box or satellite box to the channel you
want to record; leave your cable box or satellite box on for the timer recording.
6 Exit the VCR PLUS+ set up mode
Press MENU button.
To set another program, repeat steps [1] to [6].
7 Set the timer
Press POWER button. The "
" indicator on the display comes on.