Filter
Top Products
SET UP FOR USE
31
menu appears, press PLAY/
button to point to "SELEC.IDIOMA", press the F.FWD/ button,
press the PLAY/
button to point to "ENGLISH", then press the RESET/EXIT button.
NORMAL PLAYBACK
• Be sure to check that the "PWR." and the "VCR" indicators are both on.
• Turn on the TV and set the TV channel to 3 or 4. Now set the CH3/CH4 switch on the
back of the VCR to match the channel selected on the TV.
1 Insert a prerecorded tape
Counter mode appears at 0:00:00 on the TV screen. If the erase-protection tab has been
removed, the VCR will start playback automatically.
2 To begin playback
Press the PLAY button.
PLAY
NOTE: If any menu is activated on the TV screen, the PLAY button on the remote control
does not function. Press the RESET/EXIT button on the remote control to clear the
menu. Then, press the PLAY button.
If a tape is already in the VCR with power off
2A) Using button on the VCR
Just press the PLAY button on the VCR. Power will automatically turn on and playback
will start. (Direct Button Operation)
2B) Using button on the remote control
Press the POWER button to turn on the VCR, and then press the PLAY button on the
remote control.
3 To stop playback
Press the STOP button.
PICTURE SEARCH
This feature is very useful in finding or skipping over a particular scene on a tape. In this mode,
the sound will be muted.
1) You may view a video tape at a high speed in either a forward or reverse direction by
pressing the F.FWD or REW button. (in the SP / LP / SLP modes)
2) Depress it again, the VCR will now search in super high speed. (in the LP / SLP modes
only)