Filter
Top Products
SPECIAL PLAYBACK
35
Power failure: If there is a power failure for more than 30 seconds, Auto Repeat Playback will
go to off.
RENTAL PLAYBACK
This function enables you to improve the picture quality when playing back worn cassettes
such as those rented from a video shop.
• Selecting ON or OFF must be done during playback.
1 Insert rental tape into VCR
Begin playback.
2 Select "VCR SET UP"
Press the MENU button on the remote control repeatedly so that the VCR SET UP menu
appears.
VCR SET UP
AUTO REPEAT
RENTAL
AUTO RETURN
3 Select "RENTAL"
Press the PLAY/ or STOP/ button repeatedly to point to "RENTAL".
4 Select "RENTAL" to [ON]
Press the F.FWD/ button so that "RENTAL ON" appears.
• Once you select the Rental mode, it stays in effect even after you turn off the VCR.
• To stop playback, press the STOP button.
TO EXIT THE RENTAL PLAY MODE
Repeat steps [1 ] to [3]. Then press the F.FWD/
button so that "RENTAL OFF" appears on
the TV screen.
Power failure: If there is a power failure for more than 30 seconds, Rental Playback will go to
off.
INDEX SEARCH
This feature provides a method of indexing the starting point so that it can be easily returned to
in either fast forward or rewind mode.
· The index mark will be made automatically when the REC button is pressed. It will also be
marked at the starting point of Timer recording, IRT.
· The index mark will not be recorded if the PAUSE button on the remote control is pressed
and released during recording.
· The time gap between making the index marks on the tape should be greater than 1 minute