Filter
Top Products
PREPARATION FOR USE
19
Note: Channel memory programming is NOT needed when using this connection.
RECORDING HINT
1 ) Be sure to check that the "PWR." and the "VCR" indicators are both on.
2) Turn on the TV and Box.
3) Set the channel to be recorded on the Cable Box.
4) Set the TV and VCR to channel 3 or 4.
5) Set the CH3/CH4 switch on the back of the VCR to match the channel set on the TV and
VCR.
6) Press the REC button. For AUTOMATIC TIMER RECORDING, the VCR must stay on
channel 3 or 4 at step [9] on page 25.
Continued on the next page.
Some customers with cable boxes may record one channel and view another, with either one
of the connections below.
Satellite systems: Neither one of these connection will work. For satellite owner wishing to
record one channel and view another, please contact the manufacture of the satellite system.
Fig. 5:
You can record a scrambled channel while viewing another.
RECORDING HINTS
1 ) Be sure to check that the "PWR." and the "VCR" indicators are both on.
2) Turn on the TV and Box.
3) Set the channel to be recorded on the Cable Box.
4) Set the TV and VCR to channel 3 or 4.
5) Set the CH3/CH4 switch on the back of the VCR to match the channel set on the TV and
VCR.
6) Press the REC button. For AUTOMATIC TIMER RECORDING, the VCR must stay on
channel 3 or 4 at step [9] on page 25.
7) Set the A-B switch to the other side. For AUTOMATIC TIMER RECORDING, set the A-B
switch to the other side after step [12] on page 25.