Filter
Top Products
TIMER RECORDING
52
Now, compare the channel numbers you have written in the GUIDE CH. and USER CH.
columns. You must set all of these channel numbers that don't match using the following
procedure before you program the automatic timer recording using the VCR Plus+ system.
• This setting only needs to be set once, but must be done again if you use this VCR in another
area by moving it.
1 Select "INITIALIZE"
Press MENU button until INITIALIZE menus appears.
INITIALIZE
CHANNEL SET UP
SETTING CLOCK
LANGUAGE SELECT
GUIDE CHANNEL SET
GUIDE CHANNEL MAP
2 Select "GUIDE CHANNEL SET"
Press /PLAY or /STOP button to point to "GUIDE CHANNEL SET".
Then, press F.FWD/
button.
3 Enter a guide channel number (GUIDE CH.)
Press the number buttons or the PLAY/ or STOP/ button until a guide channel number
you want to enter appears. (Example: 25)
Then, press the F.FWD/ button.
• You can select guide channels 01 - 99.
GUIDE CHANNEL SET