Filter
Top Products
TIMER RECORDING
55
2 Select "GUIDE CHANNEL MAP"
Press /PLAY or /STOP button to point to "GUIDE CHANNEL MAP".
Then, press F.FWD/ button.
3 Select the channel you want to cancel.
Press
/REW button. A pair of numbers flash.
Then, press
/PLAY or /STOP button until the pair of numbers you want to cancel flash.
• If the channel you wish to cancel is not on the screen, press F.FWD/
button to change the
displayed page until you reach the correct page.
GUIDE CHANNEL MAP
GUIDE USER GUIDE USER
25 : 50 39 : 45
52 : 68 68 : 79
70 : 02 77 : 09
80 : 84
4 Delete it from memory
Press /REW button.
• If you want to cancel another channel, repeat steps [3] to [4].
5 To return to TV mode
Press RESET/EXIT button.
TIMER RECORDING USING THE VCR PLUS+ SYSTEM
You can program the timer using the PlusCode numbers that are printed in most newspaper
TV listings and TV guide magazine. You can set seven programs including normal timer
recording to record within one month. You need to coordinate guide channel numbers and
user channel numbers before you program the automatic timer recording using the VCR Plus+
system. (Refer to "SETTING THE GUIDE/USER CHANNELS FOR THE VCR PLUS+
SYSTEM" on page 27.)
Make sure...
• You must use the remote control for this procedure.
• Be sure to check that the "PWR." and the "VCR" indicators are both on to program it.
• Turn on the TV and set the TV channel to 3 or 4. Now set the CH3/CH4 switch on the back
of the VCR to match the channel selected on the TV.
• Clock must be set to the correct time and date before setting the timer.
• Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast
forward the tape to the point at which you want to begin recording.)