Filter
Top Products
SET UP FOR USE
30
- MEMORIZED -
6 Exit the preset mode
Press MENU button on the remote control to return to TV mode.
NOTE: To confirm that channel(s) has been deleted or added, press the CHANNEL(CH) or
button.
CHANNEL SET UP AGAIN
Remember: If your cable box or satellite box is connected as in Fig 4 on page 11 or Fig 5 on
page 12, you DO NOT have to set up the channels. Just select the TV and VCR to channel 3
or 4 and also have theCH3/CH4 switch on the back of the VCR to match the channel you
selected (CH 3 or CH 4). Now select the Box to the channel you wish to view or record.
• Use the remote control for this procedure.
1) Press the MENU button until the INITIALIZE menu appears.
2) Confirm "CHANNEL SET UP" is pointed to, then press the F.FWD/ button.
3) Confirm "AUTO TUNING" is pointed to, then press the F.FWD/ button. After scanning, the
tuner stops at the lowest memorized channel.
• The VCR distinguishes between standard TV channels and cable channels.
CHANNEL SET UP
AUTO TUNING
ADD/DELETE CH
SELECTING THE LANGUAGE
If you want to change the language on the TV screen, follow the steps below:
Note: This function effects only the language on the screen menu and not the audio source.
• Use the remote control for this procedure.
1) Press the MENU button on the remote control repeatedly so that the INITIALIZE menu
appears.
2) Press the PLAY/
or STOP/ button to point to "LANGUAGE SELECT". Then, press the
F.FWD/ button.
3) Select "ENGLISH" or "ESPANOL"= Spanish by using the PLAY/
or STOP/ button.
4) Press the RESET/EXIT button to return to TV mode.
NOTE: If for some reason the menu is in Spanish, press MENU button until "PARA INICIAR"