Filter
Top Products
RECORDING
40
RECORDING
Make sure...
• VCR power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel as located on the back
of the VCR. (CH 3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on the display.
• Insert a cassette with its erase prevention tab in place. (If necessary, rewind or fast forward the
tape to the point at which you want to begin recording.)
VIEWING AND RECORDING THE SAME PROGRAM
1 Select the channel to be recorded
Press number buttons on the remote control or the CHANNEL (or CH) or button.
NOTE: When you record with a cable converter box, the VCR channel must be selected to 3 or 4
then the actual channel that you wish to record must be selected on the cable converter box.
2 Select the tape speed
Press TAPE SPEED button on the remote control to select the desired tape speed (SP/LP/SLP).
3 Begin recording
Press REC button. The red " " appears on the display