Filter
Top Products
SETTING THE REMAINING TIME
51
SETTING THE REMAINING TIME
You can set the remaining tape running time of your tape. Follow the steps below to correct the
tape remaining indication.
Make sure...
• VCR power must be turned on.
• Turn on the TV and set the TV channel to the same video output channel as located on the back
of the VCR. (CH3 or 4)
• Press VCR/TV button on the remote control so that "VCR" appears on the display.
• You must use the remote control for the following procedure.
• A video cassette must be inserted in the VCR for this function to work.
1 Select the main menu.
Press MENU button.
2 Press CH or button repeatedly to point to "VCR SET UP".
Then, press SELECT button.
3 Select "~T60", "~T130" or "T140~"
Press SELECT button so that your desired time appears.
For example, the popular T-120 cassette tape calls for the "~T130" selection.
4 Exit the preset mode
Press MENU button to return to TV mode.