Hitachi VT-MX411AC Portable DVD Player User Manual


 
TIMER RECORDING
48
Press STOP/EJECT button on the VCR.
NOTE: STOP button on the remote control will not function in the Automatic Timer Recording
mode.
TO CANCEL OR CHECK THE START/END TIME
1) Repeat steps [1] to [2] previous page.
2) Select a program number you want to check using CH or button. The details of
selected program appears on the TV screen.
You may cancel the entire program by pressing ADD/DELETE button.
HINTS FOR TIMER RECORDING
• If there is a power failure or the VCR is unplugged for more than 30 seconds, the clock setting
and all timer settings are lost.
• If the tape runs out before the end time, the VCR will switch to the Stop mode immediately,
eject the tape and the VCR power will be turned off. The " " indicator will flash.
• If a tape is not inserted or the erase-protection tab is removed, the " " indicator flashes and
automatic timer recording cannot occur. Insert a tape that allows recording.
• The TV that is connected to your VCR may be turned ON or OFF when the VCR is in the
timer-record mode.
• When you record a cable channel program with cable converter box, first set the VCR's channel
to 3 or 4 whichever is the output channel of your cable box to the channel you want to record and
leave on while you are recording with power on.
AUTO RETURN
If you select auto return to [AUTO] from the menu, when all the timer recordings are completed,
the VCR will return to the beginning of the recorded program(s).
NOTE: If there are any remaining programs including Daily & Weekly, this function does not be
done.
1 Select the main menu
Press MENU button.
2 Select "VCR SET UP"