Filter
Top Products
PLAYBACK
30
VERTICAL HOLD CONTROL
When the picture begins to vibrate vertically, stabilize the picture by pressing CHANNEL (or
CH) or button in the Still mode.
NOTES:
• When the picture is distorted or rolling vertically, adjust the vertical hold control on your TV.
• Some latest TV's do not have a user adjustable vertical hold.
TRACKING ADJUSTMENT
• Tracking adjustment will be set automatically (Digital TRacking function) when you start
playback "DTR" appears on the display.
NOTE: The following function is controlled only by the buttons on the VCR.
• When playing pre-recorded tapes or tapes recorded on units other than your own, noise lines
(black and white streaks) may appear on the playback picture. If this occurs, you can adjust the
tracking control manually by pressing CHANNEL or button until the streaks disappear.
To return to the DTR function, stop the tape once and start playback again.
• You can reduce the noise lines by pressing CHANNEL or button in the slow mode, too.
Slow tracking adjustment will not be set automatically.
Note: In Still mode, press both PLAY and PAUSE button on the remote control at the same time and
press CHANNEL or button until the streaks disappear. To return to Still mode, press PAUSE
button again.
SLOW MOTION
Press both PLAY and PAUSE button on the remote control at the same time to reduce the
playback speed. The VCR mutes the sound during slow motion. You can control the speed by
pressing F.FWD button (faster) or REW button (slower).
Press PLAY button to return to normal playback.
NOTES: If it is left in the Still mode for more than five minutes, the VCR will automatically switch
to the Stop mode.
AUTO REWIND