Hitachi VT-MX411AC Portable DVD Player User Manual


 
PREPARATION FOR USE
18
CONNECTING TO INPUT JACKS
When you copy a video tape, or watch a program recorded on an another source, use audio/video
input jacks.
INPUT SELECT
To use the external input jacks, select the AUX position. Press the CHANNEL or button
or enter "00" with number button on the remote control so that "AUX" appears on the screen.
Note: "AUX" is found before the lowest memorized channel. (Example: CH2)
INSTALLING THE BATTERIES
1) Open the battery compartment cover by pressing the cover on the remote unit in the direction
of the arrow.
2) Insert 2 "AA" penlight batteries into the battery compartment in the direction indicated by the
polarity (+/-) markings.
3) Replace the cover.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall
be connected to the grounding system of the building as close to the poing of cable entry as practical.