Hitachi VT-MX411AC Portable DVD Player User Manual


 
VIDEO CASSETTE
12
VIDEO CASSETTE
This VCR will operate with any cassette that has the VHS mark. For best results, we recommend the use
of high-quality tapes. Do not use poor quality or damaged tapes.
PRECAUTIONS
• Avoid moisture, which can condense on the tape if it is moved from a cold place to a warm place.
Before using a tape with these conditions, to avoid damage to the tape and your VCR, wait until the tape
has warmed to room temperature and the moisture has evaporated.
• Avoid extreme heat, high humidity and magnetic fields.
• Do not tamper with the cassette mechanism.
• Do not touch the tape with your fingers.
THREE DIFFERENT TAPE SPEEDS
Before recording, select the tape speed from: SP mode (Standard Play), LP mode (Long Play) or SLP
mode (Super Long Play).
The table below shows the maximum recording/playback time using T60, T120, or T160 tapes in each
mode.
INSERTING A CASSETTE
Insert the cassette in the direction as shown. Push in gently, but continuously, on the center-back of the
cassette until it is drawn into the VCR.
The VCR will automatically turn on.
REMOVING A CASSETTE
1) In the Stop mode, press STOP/EJECT button on the VCR. The cassette will eject.
2) Pull the cassette out of the cassette compartment.
3) Store the cassette in the case as shown.