Grundig UMS 4100 Portable Stereo System User Manual


 
24
TUNER MODE
_____________________________________________________________________________
Radiotext
Some RDS stations provide Radiotext as additional information. Radiotext appe-
ars as ticker text in the display. As this information is transmitted character by
character, it may take some time before the text is received in full.
1 Call up the radiotext by pushing »
TEXT
« on the remote control.
– The information appears after a short time.
2 For a fast run-through of the radiotext, press and hold down »
TEXT
«.
Note:
If reception is poor there may be gaps in the Radiotext message.
If the station does not currently provide radiotext, »NO TEXT« appears in the
display.
3 Press »
TEXT
« to quit the radiotext level.
Programme types (PTY)
1 To call up the current programme type, press »PTY« on the remote control.
– Display: the current programme type, e.g. »NEWS«, and »PTY«.
– If no programme type code is transmitted, »NO PTY« appears in the
display.
2 Press »PTY« repeatedly on the remote control for a selection of other
programme types.
3 Press »TUNING UP/DOWN« on the device to start the PTY search.
– Display: »FM«, the frequency for rapid run-through, »PTY« flashes.
4 Press »TUNING UP/DOWN« on the device briefly to interrupt the
programme search.
f
TEXT
PRESET
MUSi K uND
!
05
f
TEXT
PRESET
NO T E T
!
05
f
PRESET
NEW
!
20
f
PTY
FM 95 60
.
X
S