Filter
Top Products
ENGLISH
23
TUNER MODE
_____________________________________________________________________________
RDS station service
RDS (Radio Data System) is an information system which is transmitted additio-
nally by most FM stations.
If the device is currently receiving an RDS station, it displays the station name,
for example »FANTASY«, and »
f
«.
Note:
It may take some time before all the RDS information is available.
Searching for RDS stations
1 Search for the desired RDS station by repeatedly pressing »
5a §
«or
»
sss6
« until an RDS station is received and »
f
« appears in the
display.
– After a short time the station name appears if the reception strength is
sufficient.
Calling up RDS information
If an RDS station is being received, the frequency briefly appears in the display,
and afterwards the station name permanently.
1 Press the »
DISPLAY
« button once on the remote control.
– The wavelength and the frequency appear in the display.
2 Press the »
DISPLAY
« button on the remote control again.
– The time appears in the display.
3 Press »
DISPLAY
« on the remote control for the third time.
– The station name appears again in the display continuously.
Note:
The time display is updated every minute. The accuracy depends on the
information transmitted by the station itself. You must be tuned to the RDS
station for several minutes before the time information can be transmitted.
During this procedure, »CT« flashes in the display.
f
PRESET
Vi l ra i o
!
05
f
PRESET
FM 91 00
.
!
MHz
05
f
PRESET
11 47
:
!
05
d