Filter
Top Products
ENGLISH
13
CONNECTION AND PREPARATION
_______________________________________
Connecting headphones
1 Insert the headphone plug (ø 3.5 mm) into the »0« socket on the front of
the stereo system.
– The loudspeakers of the stereo system are switched off.
Connecting the power cord
Note:
Check that the mains voltage on the type plate (on the back of the device)
corresponds to your local mains supply.
The only way to disconnect the device from the mains supply is to pull out the
plug.
1 Plug the power cord supplied into the »~AC« socket on the device.
2 Insert the power plug into the mains socket.
Inserting the batteries in the remote control
1 Open the battery compartment by pushing down the lid of the battery com-
partment.
2 When inserting the batteries (mignon type, for example AA, R 6, UM3), obser-
ve the polarity marked on the base of the battery compartment.
Note:
If the device no longer reacts properly to remote control commands, the bat-
teries may be flat. Always remove flat batteries. No liability is accepted for
damage resulting from leaking batteries.
Environmental note:
Batteries, including those which are heavy metal-free, may not be disposed
of with household waste. Please dispose of used batteries in an environmen-
tally sound manner. Find out about the legal regulations which apply in your
area.
ON/OFF
AUX
F
DSC
UBS
SPEAKER
R
L
AC
~