Filter
Top Products
12
CONNECTION AND PREPARATION
_______
Connecting the antenna
1 Insert the rooftop antenna in the antenna socket »FM ANTENNA« on the
stereo system.
Note:
If no rooftop antenna is available, use the auxiliary antenna supplied. This
aerial provides reasonably good reception of local FM (VHF) stations.
Do not shorten the auxiliary antenna.
2 Insert the wire frame antenna into the »AM ANTENNA« terminals on the
stereo system. Adjust the position of the wire frame antenna until reception is
at its best.
Connecting the loudspeakers
1 Connect the loudspeaker cables to the »SPEAKER RL
+
RL –« terminals on
the stereo system and the »
+
INPUT –« terminals on the loudspeakers.
Connect the cables labelled in red to the red terminal.
Connecting an external device
1 Connect the audio output sockets of the external device (for example a televi-
sion or DVD-player) to the »AUX« sockets on the stereo system using a
cinch cable.
Note:
Switch the stereo system off before you connect external devices.
Make sure the stereo channels are properly connected:
R = right channel (red), L = left channel (white).
AUX
L
R
SPEAKER
R
FM ANTENNA
AM ANTENNA
AUX
L
R
SPEAKER
R
L
FM ANTENNA
AM ANTENNA
AC
~
TV
R