Filter
Top Products
ENGLISH
21
TUNER MODE
________________________________________________________________
Selecting the tuner as the source
1 Select the input source using the »TUNER/BAND« button.
– The most recently selected station can be heard (Last Station Memory).
– Display: e.g. »FM 100.60« or »ENERGY«.
Selecting the preset position
1 Select the frequency band (FM or MW) by pressing the »TUNER/BAND«
button.
2 Press »
5a §
« or »
sss6
« to move up and down channel positions
one at a time.
– Display: e.g. »PRESET 04«, then the frequency or the station name.
Note:
Only free channel positions can be selected.
Stereo/mono reception
If the device is receiving an FM stereo programme »ɳ« appears in the display.
However, if the signal from the FM stereo station is weak, you can improve the
sound quality by switching to mono reception.
1 Press »FM MODE« on the remote control to switch to mono reception.
– Display: »ɳ« disappears.
2 To switch back to FM stereo press »FM MODE« on the remote control.
– Display: »ɳ«.
Note:
If the device is set to stereo reception and is receiving a mono signal, the
»
ɳ« display flashes.
f
PRESET
ENER Y
!
18
f
PRESET
FAN TA Y
!
04
PRESET
FM 107 1 0
!
MHz
28
G
S