Filter
Top Products
16
SETTINGS
____________________________________________________________________________________
Tuning and storing radio stations
Automatic station search (ASP)
After the stereo system has been connected to the mains for the first time, the
device searches in tuner mode on the FM waveband for the 40 stations with the
strongest reception strength and stores them. In this process, preference is given
to RDS stations.
1 After connection, switch on the stereo system with »TUNER/BAND«.
– Display: »FM«, the frequency in rapid run-through, »PRESET« flashes.
– The search has begun. After the search has finished, the station stored in
position 01 can be heard.
Note:
The automatic station search can be interrupted with »PROGR«.
Automatic station search
1 Switch on the stereo using the »TUNER/BAND« button.
– Display: »TUNER«, then the waveband and frequency or station name.
2 Select the frequency band (FM or MW) by pressing the »TUNER/BAND«
button.
– Display: »FM« or »MW«.
3 Activate the station search by pressing »TUNING UP/DOWN« on the
device until the frequency display changes to rapid run-through.
– The search stops when a programme is found.
4 To switch to manual tuning, press »TUNING UP/DOWN« once on the
device briefly.
PRESET
FM 100 60
.
MHz
25
f
PRESET
T UNER
01
f
PRESET
ENER Y
!
01
G