Filter
Top Products
SETTINGS
____________________________________________________________________________________
ENGLISH
15
The CT time signal is transmitted once every minute by the station. You must
receive the RDS station for several minutes before the time information can
be transferred to the stereo system. However, not every RDS station transmits
the time signal.
8 If you wish, you can switch off the RDS time synchronization with
» TUNING UP/DOWN«.
– Display: »CT OFF« briefly, then the current time.
9 To switch the function on again, repeat steps 1 to 8.
Notes:
If, when setting the time, no button is pushed for a period of longer than 10
seconds, the system will end the process automatically. You then have to start
again at the beginning.
During setting, the display can be illuminated for approximately 8 seconds
by pressing any of the buttons.
CT OFF