Filter
Top Products
Quick Start Plug and Play
6
2. Attach the audio cables to the Firefly.
❏ For an unbalanced audio connection use audio cables with
stranded wire ends and connect to terminal 1 (Left +),
terminal 4 (Right +), and terminals 2 and 4 (designated
grounds).
❏ If unbalanced audio cable lengths exceed 10 meters, use an
Audio Line Amp/Balancer such as the Radio Design Labs,
Stick On.
❏ For a S/PDIF digital audio, use a stranded audio cables and
connect to terminal 5 Digital Audio (+) and terminal 6 (-).
3. Attach video and audio cables to the video and audio inputs on
the video monitor and audio component.
4. Cable the Firefly to the network.
5. Plug in the power supply and attach the power cable to the
Firefly. The Firefly powers up and performs a short series of
self-diagnostics and then begins automated playback