Filter
Top Products
English
280-8180-00
DXZ958RMC 59
DAB control function
When a CeNET cable is used to connect a DAB
(Optional, DAH913 or DAH923), all functions
can be operated.
Listening to the DAB station
1. Press the [SRC] button to select the DAB
mode.
Notes:
• The display shown in the normal reception mode
and the preset reception mode is the same as
that when a DAB station is received.
• The number of programmes and broadcasting
times depend on the DAB station.
• When the strength of DAB signals is weak, audio
output is muted.
Seek tuning
1. Press the [SRC] button to select the DAB
mode.
2. Touch and hold [BAND] for 1 second or
longer if “MANU” is displayed.
Seek tuning is possible when “SEEK” is
displayed.
3. Touch on the left of the display.
“DAB” lights up in the display when the main
unit receives a DAB station.
∗ The main unit stops the seek tuning when
it cannot find a DAB station. The display
returns to the original mode.
Manual tuning
1. Press the [SRC] button to select the DAB
mode.
2. Touch and hold [BAND] for 1 second or
longer if “SEEK” is displayed.
Manual tuning is possible when “MANU” is
displayed.
3. Touch on the left of the display to
tune the station.
∗ If no operation is performed for more than
7 seconds, manual tuning is cancelled and
the display returns to the seek turning
mode.
Digital Radio / DAB Operations
Switching programmes
1. Press the [SRC] button to select the DAB
mode.
2. Touch on the left of the display to
switch programmes in the DAB station.
Note:
• The programme name may be the same
depending on the DAB programme.
Programme scan
This function scans through each receivable
programme in a DAB station being received for
10 seconds sequentially. This is useful when you
want to search for a desired programme.
1. Press the [SRC] button to select the DAB
mode.
2. Touch [S-SCAN].
“S-SCAN” lights up and this unit starts
scanning each programme for 10 seconds
sequentially.
Each time the main unit scans, the
programme name is shown in the display.
3. To stop programme scan when a desired
programme is tuned in touch [S-SCAN].
Manual memory
The main unit has a manual memory function for
DAB programmes. Up to 18 programmes (6
programmes each) can be preset to the preset
buttons.
[M1], [M2] and [M3]
1. Press the [SRC] button to select the DAB
mode.
2. Touch [BAND] to select any one shown
above.
3. Touch [PRESET].
The preset memory No. list is displayed.
4Touch and hold the preset No. to be stored
for 2 seconds or longer.
You will hear a long beep, and the station is
stored to memory.
If you hear a short beep, the station is not
stored to memory. Repeat the procedure
from step 1.
Note:
• Interrupt programmes (PTY or INFO) cannot be
written to manual memory.
+DXZ958RMC_01-53-Eng.p65 05.1.20, 19:5359