Filter
Top Products
English
280-8180-00
32 DXZ958RMC
Sound Adjustment
Adjustment items
You can adjust a sound effect or tone quality to
your preference. A speaker system is selected in
the speaker select procedure (cf. page 14) when
this product is turned on for the first time.
The adjustment item depends on the speaker
system.
● 3 WAY
Anti Distortion Filter (ADF).................... Page 32
SETTING
Parametric Equalizer (P.EQ) .............. Page 33
Crossover (X-OVER) ........................ Page 34
Time Alignment (TIME ALIGN) ......... Page 35
Speaker Gain (SP GAIN) .................. Page 35
All Seat setting (ALL SEAT) ............. Page 36
Sub-woofer speaker volume
(SW VOLUME) ................................ Page 36
Bass setting (BASS) ............................ Page 37
Treble setting (TREBLE) ...................... Page 37
Balance (BALANCE) ............................. Page 37
● 2 WAY
Anti Distortion Filter (ADF).................... Page 32
SETTING
Parametric Equalizer (P.EQ) .............. Page 33
Crossover (X-OVER) ........................ Page 34
Time Alignment (TIME ALIGN) ......... Page 35
Speaker Gain (SP GAIN) ................. Page 35
All Seat setting (ALL SEAT) .............. Page 36
Bass setting (BASS) ............................ Page 37
Treble setting (TREBLE) ....................... Page 37
Balance (BALANCE) ............................. Page 37
Fader (FADER)..................................... Page 37
● Dolby PLII
Anti Distortion Filter (ADF).................... Page 32
Sub-woofer speaker volume
(SW VOLUME) ................................ Page 36
Center speaker volume
(CTR VOLUME) ............................... Page 36
Balance (BALANCE) ............................ Page 37
Fader (FADER)...................................... Page 37
Dolby mode (Dolby PL II) ...................... Page 40
Speaker Gain (SP GAIN) ..................... Page 40
Filter (FILTER)...................................... Page 41
Music mode setting (PL II CONT) ......... Page 41
Delay time of the rear speakers
(PL II DELAY) .................................. Page 42
● NORMAL
Anti Distortion Filter (ADF).................... Page 32
Sub-woofer speaker volume
(SW VOLUME) .................................. Page36
Bass setting (BASS) ............................. Page 37
Treble setting (TREBLE) ....................... Page 37
Balance (BALANCE) ............................. Page 37
Fader (FADER)...................................... Page 37
Virtual Space Enhancer (VSE).............. Page 37
Parametric Equalizer (P.EQ) ................. Page 38
Filter (FILTER)....................................... Page 41
Setting the ADF
• ADF is the abbreviation of Anti Distortion
Filter.
The adopted “Liveliness Enhancement Filter”
and “Sound Tone Compensation” functions
allow well-modulated realistic playback without
affecting the characteristics of the original sound
tone.
This unit is provided with 4 types of sound tone
effects stored in memory. Select the one you
prefer.
ADF-1 : Suitable for genuine speakers
ADF-2 : Suitable for separate speakers
ADF-3 : Suitable for co-axial speakers
USER : This setting can be adjusted by the
user to his or her individual preference.
OFF : No sound effect
• The factory default setting is “OFF”.
Notes:
• As the volume changes when ADF is switched,
switch ADF with the volume and “SW VOLUME”
(sub-woofer) and “CTR VOLUME” (center
speaker) turned down as far as possible.
• On some speaker systems, sufficient effect
sometimes cannot be obtained. If this happens,
adjust the volume.
• When ADF is set to “USER”, “1”, “2” or “3”, the
VSE function and BASS/TREB function under
EQ-SELECT are disabled.
1. Press the [SOUND] button.
2. Touch [ADF].
SOUND
ADF
OFF 0 0
SETTING
SW
VOLUME
BALANCE
1 1
RTN
3. Touch on the right of the display to
select the ADF mode.
ADF MODE
1
RTN
ADF 1
∗ Select one of “USER”, “1”, “2”, “3”, or
“OFF”.
+DXZ958RMC_01-32-Eng.p65 05.1.20, 19:5232