Filter
Top Products
English
280-8180-00
DXZ958RMC 57
Seek tuning
Seek tuning is a function for automatically tuning
stations with good reception.
1. Touch and hold [BAND] for 1 second or
longer while “MANU” is displayed.
Automatic tuning is possible when “SEEK” is
displayed.
2. Touch
on the channel display.
“SEEK UP/SEEK DOWN” is displayed, and
tuning starts.
Tuning automatically stops at stations with
good reception.
■ To cancel tuning
1. Touch on the channel display again.
Manual tuning
There are 2 ways available: quick tuning and
step tuning.
In the step tuning mode, the frequency changes
1 step at a time. In the quick tuning mode, you
can quickly tune the desired frequency.
1. Touch and hold [BAND] for 1 second or
longer if “SEEK” is displayed.
Manual tuning is possible when “MANU” is
displayed.
2. Operate the channel display to tune to a
channel on which there is a broadcast.
● Step tuning
Touch on the channel display.
● Quick tuning
Touch
on the channel display. Tuning
stops when you take your finger away from the
panel.
Recalling a preset station
This function allows the user to select a preset
station.
1. Touch [PRESET].
The preset memory No. list is displayed.
2. Touch the preset memory No.
∗ The station can also be tuned by touching
in the standard operation display.
■ To cancel tuning
1. Touch [RTN].
Preset memory
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your
favorite TV stations and store them in memory
for later recall.
1. Touch [BAND] to switch the reception band.
2. Operate the channel display to select the
station to store to.
3. Touch [PRESET].
The preset memory No. list is displayed.
4. Touch and hold the preset No. to store for 2
seconds or longer.
You will hear a long beep, and the station is
stored in memory.
Auto store
Auto store selects 6 TV stations automatically
and stores each one into preset memory.
1. Touch and hold [PS/AS] for 2 seconds or
longer.
“A-STORE” appears on the display.
∗ Stations with good reception are
automatically searched, and are stored to
preset memory (No.1 to No.6) in order
from the station having the lowest
frequency.
Notes:
• When auto store is performed, stations stored to
memory so far are cleared.
• When there are fewer than 6 stations with good
reception, low frequencies are automatically
returned to, and auto store is performed again. If
there are fewer than 6 stations even after auto
store is performed twice, stations stored so far
remain in memory.
Preset scan
Preset scan is a function for receiving stations in
the order that they are currently stored to preset
No. so that broadcasts can be checked.
1. Touch [PS/AS].
“P-SCAN” appears on the display.
∗ The currently stored stations are received
in order for 7 seconds or longer each.
Stations with poor reception are skipped,
and the next station is received.
TV Operations
+DXZ958RMC_01-53-Eng.p65 05.1.20, 19:5357