Filter
Top Products
English
280-8180-00
DXZ958RMC 49
Common Operations
Setting internal amplifier use
ON/OFF (AMP CANCEL)
Set internal amplifier use ON/OFF matched to
whether or not an external amplifier is used.
Set AMP CANCEL to “ON” (internal amplifier
use OFF) when an external amplifier is
connected and the internal amplifier is not used.
• The factory default setting is “OFF” (internal
amplifier used).
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SOUND].
3. Touch
on the left of the display to
select “AMP CANCEL”.
RTN
AMP
OFFCANCEL
ADJ
SOUND
4. Touch
on the right of the display to
select “ON” or “OFF”.
5. Press the [ADJ] button to return to the
original mode.
AUX function
This system has an external RCA input so you
can listen to sounds and music from external
devices connected to this unit.
Selecting AUX / TEL
You can listen to sound and music from external
devices, or your telephone calls from the
speakers when connected to this unit.
When TEL INT or External device is connected
to this unit, you can select the TEL mode or
AUX mode.
• The factory default setting is “AUX”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
3. Touch
on the left of the display to
select “AUX/TEL”.
RTN
AUX/TEL
AUX
ADJ
SETTING
4. Touch on the right of the display to
select “AUX” or “TEL”.
AUX:
The AUX/TEL input cable is for external
Audio input.
TEL:
The AUX/TEL input cable is for cellular
phone audio input.
5. Press the [ADJ] button to return to the
original mode.
Setting the input level (AUX
SENS) of portable audio (AUX
mode)
This function allows you to set the input level of
optional external devices connected to this unit.
• The factory default setting is “MID”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
3. Touch
on the left of the display to
select "AUX SENS".
RTN
AUX
SENS
MID
ADJ
SETTING
4. Touch on the right of the display to
set the input level.
∗ Select LOW, MID or HIGH.
Notes:
• When the input level is overloaded, “OVERLOAD”
appears. Adjust AUX SENS or the input level so
that “OVERLOAD” disappears.
5. Press the [ADJ] button to return to the
original mode.
Setting the car speaker
output for the cellular phone
(Optional TEL-002)
•To output telephone calls, set the cellular
phone.
• The factory default setting is “RIGHT”.
1. Press the [ADJ] button to set to the adjust
mode.
2. Touch [SETTING].
+DXZ958RMC_01-32-Eng.p65 05.1.20, 19:5249